Flexface lightbox
A tensioned vinyl face on an extruded aluminium frame, with separate covers and adjusters.
- Frame alternatives
- DIR-486 · DIR-977
- Cover and adjuster
- DIR-839 · DIR-840
XYZ Fabrication Studio
Sign construction catalogue.
Compare how signs are made. Inspect the assembly, check the source drawings, and open a build to size and cost it.
Browse builds Flexface lightbox
2,400 × 800 × 160 mm Drag to rotate
The 160 and 200 mm frame alternatives use DIR-839 covers and DIR-840 adjusters. The retail guide documents those parts with a DIR-838 body.
Open in StudioBrowse sign builds
6 builds
Double-sided opal lightbox
Two rigid opal faces retained in an aluminium frame, with access to remove a face for service.
- XYZ concept faces
- 4.5 mm opal acrylic
- XYZ frame and trim
- EK9168 · 813657
- Commercial reference
- 150 mm LB-DS extrusion
Intracut lightbox
A routed, groove-folded ACM tray with flush opal inserts and a continuous opal backing.
- Face and returns
- 3 mm folded ACM
- Illuminated detail
- 3 mm insert · 3 mm backing
Source drawings
Folded ACM totem
Two folded wraps meet on the returns around a separate internal frame.
- XYZ face construction
- Two folded ACM wraps
- Job checks
- Access, supports and footing
ACM pylon reclad
An ACM face with two integral returns wraps around the sides of an existing pylon.
- XYZ face construction
- Two groove-folded side returns
- Job checks
- Carcass condition and fixing locations
Source drawings
Fabricated acrylic letters
An opal acrylic face and opaque acrylic returns around a removable PVC light tray.
- XYZ face and returns
- 3 mm acrylic face · opaque returns
- XYZ light tray
- 10 mm PVC
Construction references
Pocket and black-clip flexface
The workshop reference documents separate 200 mm pocket and black-clip builds. The Studio flexface model uses the Sydney Aluminium Centre rope-and-adjuster system.
Rear-routed face-lit letters
A separate 30 mm opal acrylic construction uses rear-routed lighting and cable access.