XYZ Design

Fabrication Studio

Build type

Folded ACM skin · retained carcass

Build type · Pylon reclad

Size one replacement ACM face with two integral side returns over an existing pylon.

Construction model

FINISHED ENVELOPE1,500 × 1,000 × 75 mm

Drag or use arrow keys to rotate

Component schedule

Build breakdown

Finished components for the estimate

Component	Material	Finished size / reference	Qty
One V-grooved piece with two 75 mm finished side returns. Top and bottom stay open.	3 mm aluminium composite	1,500 × 1,000 × 75	1

Outside face widthFace heightSide return lengthFinished distance from the outside of the face to each rear lip.ACM thickness

Place the saved Artwork Studio draft on the available faces.

The model shows one replacement skin over a retained pylon carcass. Measure the existing face opening, side clearance and lip position before building.
The left and right returns are integral to the face. Use the estimate quantity for matching skins, or set up the opposite face separately if its dimensions differ.
Any holes belong in the measured returns. Hole locations, hardware, the condition of the existing carcass and installation scope need site review.
The schedule uses finished outside dimensions. Confirm the ACM grade, groove offsets and flat blank before machining.